Moss Glue Spray

Product details:

• Volume: 600mL
• Weight: 450g
• Antibacterial rooting, strong adhesion
• Use for: Paludariums, amphibious tanks (for adhesion to driftwood, bark, background boards and other moss)

Tips for using moss glue:

Spray a thin layer on the back of the moss and the substrate to be attached. Please be sure to press and fit each other after 1 minute. After use, spray it upside down for 3 seconds. Use your own gas to flush the nozzle. You can reuse it the next time. Each bottle can be conservatively used for 1 square. The cleaner the back of the moss the better the drying adhesion effect.

1. The adhesive substrate must be dry. The adhesive surface will affect the adhesion if moisture or grease, etc is present
2. Do not stick it immediately after spraying. (You can touch it with your finger to feel the stickiness)
3. This product contains flammable gas and it should not be close to high temperature environment (above 48 degrees celcius), fire and direct sunlight
4. Use in well ventilated area. If there is contact with the skin or eyes, please clean it up with water immediately. If the discomfort persists, please consult a doctor immediately
5. Please keep out of reach of children to avoid accidents
6. When it is cold, if the nozzle is blocked or there is no glue, just warm the bottle in a container of warm water (35 degrees celcius) for 5 seconds. (the glue will freeze or solidify when it is cold)